We manufacture and distribute high performance pan and tilt mechanisms for surveillance, defense and homeland security. Coupled to our customer's payload and our telescoping masts provides stable, maintenance-free operation.
GeminEye - Military & Law
Enforcement PTZ's (brochure - click here)
The demand for high performance day/night surveillance is pressing for smaller, smarter, less expensive products. At the same time, the environments in which imaging products must function are increasingly hostile. Responding to this demand, Moog QuickSet developed the GeminEye™ modular imaging system. GeminEye not only embraces high performance in a small package, it is designed to be configured for different applications.
Based on our new QPT-LT dual side-mount positioner, it can be configured with single or dual camera blocks, for day, night or day/night capability. Various wavelength band sensors and illuminator modules are available. In designing GeminEye, Moog QuickSet queried its extensive customer base, formed over thirty years in the security industry, for a “clean-sheet” specification of all salient characteristics needed.
As a system, GeminEye is completely upgradable with swappable image blocks by the user in the field. Let the GeminEye Surveillance System be a major part of your complete security solution.
KEY FEATURES
KEY FEATURES
·Compact/
light weight
·Quick-change
camera modules (blocks)
with true plug 'n play performance
·Network
controllable or dedicated
(UniCom-LT™) controller
·Single
universal protocol, unaffected by
camera changes
·Mil-STD-810F, IP67 (Certified),
sealed and pressurized camera housings
·Illuminators
with Quick-SiteTM boresight mechanism
SENSOR INTEGRATION
·Visible
Spectrum Cameras
·Thermal
Imagers
·Illuminators
• As a system, GeminEye is completely upgradeable with
additional imager blocks by the user in the field
·As a system, GeminEye is completely
upgradeable with additional imager blocks by the user in the field. No other
competing product on the market can match the performance and quality of GeminEye.
Part No
Product Code
Description
Price
LT-600-MWS
QPT-LT
QPT-LT Dual Mounts
Bottom Exit
CALL
LT-500-MWS
QPT-LT
QPT-LT Single Mount
CALL
LT-400LB-MWS
QPT-LT
QPT-LT "L"Bracket w/Serial Cntrl
& Trans
CALL
LT-300LB-MWS
QPT-LT
QPT-LT"L"Bracket NO Serial Cntrl
& Trans
CALL
LT-200VBA-MWS
QPT-LT
Adapter- QPT-LT
Single to Dual
CALL
LT-100VB-MWS
QPT-LT
Vision Block- QPT-LT
w/Connector- NO Pcb
CALL
GVS-900-MWS
QPT-LT
GeminEye-CCD Single Vision
Camera System
CALL
GVB-800-MWS
QPT-LT
GeminEye Vision Block w/Sony
980S Camera
CALL
GTS-950-MWS
QPT-LT
GeminEye-TI Single Thermal
Camera System
CALL
GTB-850-MWS
QPT-LT
GeminEyeVision Block w/Thermal
Camera L3
CALL
GDS-1000-MWS
QPT-LT
GeminEye-DI Dual Imagers
System
CALL
7-17567-MWS
QPT-LT
Kit- Pedestal Mount-QuickSet
CALL
7-17566-MWS
QPT-LT
Kit- Corner MountBracket - QuickSet
CALL
7-17565-MWS
QPT-LT
Kit- Pole Mount Adapt
w/Chain-Strap-QSet
CALL
7-17564-MWS
QPT-LT
Kit- Curved Wall MountBracket -QuickSet
CALL
6-20115
QPT-LT
CABLE 6-20110 -
QPT-LT LONGER OR SHORTER
CALL
6-20110
QPT-LT
CABLE 10FT BASIC
QPT-LT
CALL
Patrol CCTV™ PTZ Camera - available in both single and dual head units
Patrol CCTV™ PTZ Camera - available in both single
and dual head units.
We've installed hundreds of Patrol CCTV™'s on our FM20 masts on Humvees
in Iraq
We've installed hundreds
of Patrol CCTV™'s
on our FM20 masts on Humvees in Iraq.
The Patrol CCTV™ is designed for
mobile applications such as SWAT, police, fire, security and inspection
vehicles. The Patrol CCTV™ is comprised of the SEE pan/tilt/zoom camera in an
environmentally tough housing that is attached by a 15-25 ft cable to the LOOK™ controller
which consists of a 5.5" LCD monitor with integrated joystick. The LOOK™
provides the ability to control the functions of the camera, show jitter free
video and to record audio and video for future reference. This compact
lightweight video system mounts directly to any of our telescoping masts, from
10 to 60 feet and has been tested in wind and
rain at up to 100 mph. It is available in either NTSC
or PAL format. There are many other applications for the Patrol CCTV™ such as
heavy equipment and tractors. For OEM customers, we offer engineering
change revisions to best support client solutions.
The mobility of the Patrol
CCTV™ is the most unique feature and gives a wide array of
applications.
Joystick – allows easy control of the
camera.
5.5" video monitor – provides display of camera
view.
Color/NIR- video imaging
modes.
25X Optical / 12X Digital zoom
' Tough as nails' solid cast aluminum housing
can withstand harsh environment.
Image Stabilization is built in so
vibration does not affect the viewing of the
video.
Compact and Lightweight compared to the
competition.
Pressurized Nitrogen eliminates
fogging of the camera lens due to sudden changes in temperature.
SEE™
PanAngleRange TiltAngleRange
Pan Speed
Tilt Speed
Pan/Tilt Encoder Resolution
Weight
Housing
Size
Power
Vibration
Temperature
Mounting
Leveling
440°
240°
.5° to 80° /s
.3° to 30° /s
.5°
4.5 Kg
Cast Aluminum
18 cm diameter
20 cm tall
11.5 to 30 vdc
500 ma, 2A peak
3grms 3axis
Random
5 to 1000 Hz
-20° to 70° C QuickDisconnect™
Mount Adjustment
Optical Zoom
Digital Zoom
Imaging Modes
TV Lines (NTSC/PAL)
PEL Count (NTSC/PAL) DynamicRange
Light Sensitivity
Low Light – Long Integration AutoFocus
Image Stabilization
Rich Exposure Control
Time Stamp/Titling in Video
Command/Control:
Transport
Protocol
Detector Sensor Inputs
Optional Infrared Camera Core
Optional Illuminator
25 x
12 x
Color/Near Infrared
470/460
680,000/800,000
49 dB
.02 Lux NIR Mode
yes – .25 s
yes
yes
yes
yes
RS232 or RS485
Enhanced VISCA™
2, NO or NC
7-14µm, .05°C NETD
320 x 240
720nm, 50W, 4° Spot
LOOK™
Display Video Format
Display:
Type
Size
Format
Backlight
Weight
Housing Material
Size
Power
Vibration
Temperature
NTSC or PAL
Active TFT – Color
5.5" Viewing
320 x 240
250 NIT
2.2 Kg
Aluminum
14 x 22 x 3 cm
11.5 to 18 vdc
1.3 A
1 grms 3 axis
Random, 5 to 1000 Hz
0° to 50° C Operational
The WCA is
extremely popular with law enforcement mobile command units.
FEATURES -
SMALLER, LIGHTER, TOUGHER
• 1/4" Exview HAD CCD, Sony optical 36x zoom with WDR •
High-powered 36x optical zoom • IR/
White LED selectable
-5Ø IR LED 46pcs
-5Ø White LED 46pcs
• IP66 Outdoor Application
• Endless Pan rotation (-22.5 ° to 90 ° Tilt angle)
• Up to 63 programmable preset
• less than ±0.1° Preset Accuracy
• 8 programmable Tour, 4 Pattern
• Alarm - Move the camera to programmed Preset position
with Alarm trigger.(Max. 2)
• 4 Scan(Programmable speed and diagonal scan)
• Programmable Privacy Masking(2 Zones)
• RS-422, RS-485 communication
• Multiple protocol (Pelco-D, Pelco-P,
Wonwoo)
• Built-in Menu System for Setup of Programmable Functions
• Mechanical Auto Flip
• Programmable Zoom Speed(Optional Update tool)
• DC 12V, 1.5A
FPT36 Pan Tilt Zoom Camera System
FPT36 Pan Tilt Zoom Camera System PTZ With 36x Zoom And Windshield Wiper.
This outdoor infrared high speed PTZ system features a 36x optical zoom, 530 TV lines and 3.4-122.4mm lens!! Other cool features of the CC-8811 are 48 LEDs that can see up to 328 feet, WDR, OSD and 360 degree continuous rotation. Made with a high die-cast aluminum casing, rust and shock proof, mini windshield wiper and a IP66 protection grade, this PTZ is sure to withstand even the harshest outdoor conditions
FEATURES
36x optical / 12x digital zoom
Infrared up to 328 feet (100m)
530 TVL
3.4-122.4mm
24 masking zones
WDR
Mini windshield wiper
Built in OSD
SPECIFICATIONS
Image Sensor
1/4”Sony EX-viewer CCD
Resolution
530 TV Lines
Minimum Illumination
Color 0.7 / B&W 0.01 Lux
Lens Furnished
3.4-122.4mm
Power Supply
AC24V±10% NO DC,PlS Note
Picture Elements
NTSC: 758 X 504 / PAL: 752 X 582
Pan/Tilt Speed
PAN: 0.4-90° / S Tilt: 0.4-60°/S
IR Distance
328 feet (100m)
Rotation
Pan 360° continuously, tilt 180° (-90°-+90°), with auto flip
OSD Menu
Yes
Protocols
Pelco P/D, AD, Philips (total 17 different protocols)
Setup demo camera or decoder ID address range : 0 ~ 255
Control to multi-function of demo camera, such as : menu, focus, white balance
Control the demo camera to multi-speed
Save preset position of demo camera, setup shot about the preset position. The keyboard can setup 8 shots, each shot can save 16 preset position
Two control mode : manual mode and auto mode
Control zoom, focus and iris of demo camera by manual mode
Picture control keyboard can show image, and the other functions are same as the Character Control Keyboard. It can work with multi-vision plus processor and control it at long distance
SPECIFICATIONS
Screen Display
3.5LCD color picture
Control Object
General Ball, PTZ Decode, High Speed Ball, 16 Picture Processor
Your price $560.00
Indoor motorized pan & tilt system, with motor and wired joystick
remote control.
Wired Remote Control
with 22 feet of cable.
Side view of FPT400
motor,battery bracket and battery case.
FPT400
Medium Duty Indoor Pan/Tilt
Comes with a wired joystick remote control with a 22' cable
and
a battery pack.
You can Pan (vertical) and Tilt (horizontal) at the same time,
you can also make diagonal movements.
Pan 300 degrees total (horizontal movement).
Tilts 60 degrees total (vertical movement).
Adjustable speeds. No soldering or splicing.
Pan speed 2 to 6.5º per second. (Variable)
Tilt speed 0.7 to 2.2º per second (Variable)
Maximum Load 11 (camera weight).
Standard 1/4"–20 thread for camera & tripod mounting.
Bottom view of FPT400
motor with a 1/4-20 thread for connection to your tripod.
Manufactures Specifications:
Pan movement: ------------------150º to +150º in horizontal
plane (300 degrees total).
Tilt movement: --------------------30º to +30º in vertical
plane (60 degrees total).
Pan speed: ------------------------2.0º per second to 6.5º
per second. (Variable).
Tilt speed: ------------------------- 0.7º per second to 2.2º
per second (Variable).
Maximum Load: -----------------11 pounds in upright position.
Maximum Load: ----------------- 6.5 pounds in inverted position.
Maximum Cable length: ------- 22 feet (or up to 600 feet by extending
the control cable).
Mounting: ---------------------------Horizontal and upright or inverted
position.
Operating temperature: --------15º F to 115º F.
Dimensions: -----------------------3.5" x 6" x 4".
Weight: ------------------------------3 pounds.
Power Source --------------------DC 12 Volts 270 mA max. (8 X AA
size penlight batteries).
Tilts 60 degrees
in 33 to 96 seconds.
Tilt has 3 foot-pounds of torque.
Pans at 1 to 3.7 minutes per revolution.
15 to 55 seconds per 1/4 revolution (90 degrees).
Motor is activated by contact closures.
FPT400 Light
Duty Indoor Pan/Tilt $560.00
FPT500
System
Your price $550.00 Indoor motorized pan & tilt system, with
motor, controller, ready to use 100' cable and Power Supply. You can pan
and tilt at the same time, you can make diagonal movements. No soldering
or splicing.
Pan
tilt motor.
100
foot cable.
Pan
Tilt Controller and power supply.
Indoor
motorized pan & tilt system, with motor, controller, ready to use 100' cable
and Power Supply.
The
FPT500works in indoor environments. You can pan and tilt at the same time,
you can make diagonal movements. The FPT500can accommodate a 8 pound load.
In auto mode the motor will scan back and forth from as little as 10° to as
much as 350° determined by the user adjustable set screws. Adjustable pan
limit stops. Inverted mounting OK.
Pans a full 350° Tilts +/- 60°
(equals 120° total). Pan speed 5° per second. Tilt speed 3°
per second. Operates on 24 VAC, 6 Watts. Maximum load pan 17 pounds. Maximum
load tilt 8 pounds. Dimensions 7 inches high, by 6 inches wide, by
5 inches deep. Product weight: 4 pounds. Aluminum and plastic case.
Operating temp. 20° F to 120° F.
Weatherproof
100 foot long extension cable that connects between the motor and the controller.
Inverted
mounting OK.
Push
button controller
remotely controls the pan tilt motor.
The power switch selects: 1)
Manual operation 2) Power off 3) Automatic continuous panning.
Push button switches control movement of pan right & left, and tilt up &
down.
The unit is housed in a steel desktop box, finished in dark gray
enamel. 120 VAC input and 24 VAC output. 6" wide, 2.5" high, 7.5" deep. 3
pounds
FPT500
Indoor Pan & Tilt System with Controller, Cable, Power Supply. $550.00
FPT600
System. Outdoor or Indoor Pan & Tilt Head with Controller, Cable and Power
Supplies.
The
joy stick is Fixed Speed.
FPT600
System Your Price:$660.00 Outdoor or indoors Pan and Tilt Head with Controller,
Cables and Power Supplies. Comes ready to use, no customer splicing wires
or soldering necessary. You can pan and tilt at the same time, you can make
diagonal movements. Ask the competition if they sell the necessary cables to
make their pan tilt work.
The FPT600 motor
features; An extremely quite weatherproof Pan and Tilt Head.
You can pan and tilt at the same time, you can make diagonal movements.
Adjustable pan limit switches.
Serial RS485 controlled with 16 protocols (including Pelco D)
and four selectable baud rates.
The motor is individually addressable. The controller can control
up to 32 motors.
12 pound load
rating.
Pans a full 355°. Fixed Pan speed of 9° per second.
40 seconds per 355°rotation.
Tilts -50° to +50° (equals 100° total). Tilt speed 5° per second.
18 seconds per 100°tilt.
Standard 1/4"-20 thread for tripod mounting
Construction: ABS plastic.
Weight is 4 pounds.
Size is 5" x 7" x 7" high.
Operating temperature +33 ° to +120° F.
24 VAC, 300 mA tilt motor.
24 VAC, 300 mA pan motor.
Click to see the compatible wall mounts.
100 foot long gray pan tilt
cable. Carries
the control signals and power to the motor. 2 Power supplies.
12 VDC at 500 mA for the controller. 24 VAC 40 VA to power the motor. Both
power supplies are installed on the controller side of the cable. Weight is
3 pounds.
Pan and Tilt Joystick Controller. Controls all the functions on 1 to 32
motors, including pan and tilt direction.
Maximum cable length from the
controller to the pan tilt motor is 1200 feet. Compact Design, attractive. Input
Power : 12 VDC Power consumption : 5 Watts Weight is 1 pound. Temperature
range: +35°F to +100°F Power supplies 12 VDC 500 mA&
24 VAC 40 VA
Inverted
mounting OK.
Click to see System
Connections.
The
sixteen RS485 serial controlled protocols include, three Pelco protocols and Samsung,
Neon, Panasonic, Longcomity, Hunda600, Lilin, Vicon, Molynx, Kalatel, VCL, Daiwa,
Alex and Ultrak.
FPT600
Heavy Duty Outdoor Pan & Tilt System with Controller, Cable, Power Supplies.
$660.00
FPT1000
System
Your price $690.00 Weather proof, indoor or outdoor, motorized
pan & tilt system. Includes pan tilt motor, controller and one ready
to use 100' cable, no soldering or splicing. You can pan and tilt at the same
time, you can make diagonal movements.
Weatherproof
pan tilt motor.
100
foot cable.
Pan
Tilt Controller and power supply.
The heavy-duty FPT1000
can stand up to harsh environments. The precision ball bearing gears will withstand
the daily rigors of continual use. You can pan and tilt at the same time, you
can make diagonal movements. Can accommodate a 25 pound load. In auto mode
the motor will scan back and forth from as little as 10° to as much as 350°
determined by the user adjustable set screws.
Weatherproof
100 foot long extension cable that connects between the motor and the controller.
Push
button controller
remotely controls the pan tilt motor.
The power switch selects: 1)
Manual operation 2) Power off 3) Automatic continuous panning.
Push button switches control movement of pan right & left, and tilt up &
down.
The unit is housed in a steel desktop box, finished in dark gray
enamel. 120 VAC input and 24 VAC output. 6" wide, 2.5" high, 7.5" deep. 3
pounds
Pans a full 350° Tilts +/- 60° (equals 120° total).
Pan speed 6° per second.
Tilt speed 3° per second. Operates on 24 VAC, 15 Watts. Maximum load
25 pounds. Dimensions 11 inches high, by 8 inches in diameter. Product
weight: 16.5 pounds. Aluminum hardened case. Operating temp. 14° F
to 122° F. Ruggedly built for indoor or outdoor use, our Pan & Tilt camera mount can supply your security system with the flexibility it needs! With the control box which is available, you can pan the camera up to 355°, or tilt it up or down 60° for a total of 120°. Controlling the camera's motion is as simple as pushing a button on the controlling box. You can set the mount to "Auto", in which case it will rotate clockwise, and then counter-clockwise automatically. And to resume manual operation all you have to do is press the "Auto" key again. Ideal for use with crane and jib systems, or can be used in a wide variety of video applications where full joystick control over a smooth pan and tilt is a must. Supports cameras up to 20 pounds, yet weighs less than 8! Full 350 Degree Pan and a Tilt of 60 Degrees Up and Down.
FPT1000
Outdoor Pan & Tilt System with Controller, Cable, Power Supply. $690.00
FPT2000
System.
Heavy Duty indoor or outdoor weather proof, Pan & Tilt head with
Controller, Cable & Power Supplies.
The
joy stick is touch sensitive and speed variable.
FPT2000
System Your Price:$810.00 Heavy Duty outdoor Pan and Tilt Head with Controller,
Cables and Power Supplies. Comes ready to use, no customer splicing wires
or soldering necessary. You can pan and tilt at the same time, you can make
diagonal movements. Ask the competition if they sell the necessary cables to
make their pan tilt work.
The FPT2000 motor features; A
rugged weatherproof variable speed head with stepper motor construction for precise
targeting.
You can pan and tilt at the same time, you can make any diagonal
movements. 32 programmable preset positions.
Six sets of programmable
automatic tours. Each tour can have up to 16 positions that the motor will
scan in sequence. The running speed and the dwell time at each position are adjustable.
Adjustable
pan limit switches. Adjustable tilt limit switches.
Serial RS485 controlled
with 16 protocols (including Pelco D) and four selectable baud rates.
The motor is individually addressable. The controller can control up to 32 motors.
32
pound load rating with over the top mounting. Side load mounting will drive
a greater weight. Pans a full 355°. Tilts -90° to +20° (equals
110° total). Pan speed 0.25° to 10° per second. 24 minutes
to 36 seconds per rotation. Tilt speed 0.25° to 10° per second. Construction:
Aluminum alloy casting. Weight is 22 pounds. Size is 9" x 7" x 10" high.
Operating temperature -25° to +140° F.
100 foot long gray pan tilt
cable. Carries
the control signals and power to the motor. You can order any custom length cable. 7
foot long black outdoor flexible cable will swing back and forth with the
motion of the motor. Connects the rotating motor to a fixed point on a pole or
wall. 2 Power supplies. 12 VDC at 500 mA for the controller.
24 VAC 40 VA to power the motor. Both power supplies are installed on
the controller side of the cable.
Pan and Tilt Joystick
Controller. The joy stick is touch sensitive and
speed variable. It controls all the functions on 1 to 32 motors, including; Pan
tilt direction and speed. 32 Preset positions. Automatic tours (auto scanning
of your field of view).
The further you push the joystick from center position
the faster the motor moves.
Buttons on the control panel allow up to 32
programmable preset positions and six sets of programmable automatic tours.
Maximum
cable length from the controller to the pan tilt motor is 1200 feet . Compact
Design, attractive appearance.
Input Power : 12 VDC Power consumption
: 5 Watts Operating Temperature range: +35°F to +100°F
Power
supplies 12 VDC 500 mA& 24 VAC 40 VA
The sixteen RS485 serial controlled
protocols include, three Pelco protocols and Samsung, Neon, Panasonic, Longcomity,
Hunda600, Lilin, Vicon, Molynx, Kalatel, VCL, Daiwa, Alex and Ultrak.
Optional mounting bracket. FPT
2000-bracket Your Price:$63.00 Heavy duty optional bracket
& hardware. 19" long, 6.5" wide, 6" high, 6.5 pounds. 6 wall mount holes.
12 motor mount holes. 3/8" thick steel.
FPT2000
Heavy Duty Outdoor Pan & Tilt System with Controller, Cable, Power Supplies.
$810.00
FPT3000
COMPLETE SYSTEM
90 POUND PAYLOAD!
Quasar Surveyor Heavy Duty Outdoor Weather Proof, Pan & Tilt Head Positioner with
Controller, & Cable.
The Floatograph FTP3000 QS SERIES provide 450° azimuth and 180° elevation control of medium- and large-size payloads under remote control from the station operating position. The factory-lubricated unit is housed in weatherproof melamine resin coated die-cast aluminum, to provide maintenance-free operation under all climatic conditions.
FPT3000
System QS90 - 90 POUND PAYLOAD Price: $2,500
Quasar Surveyor Heavy Duty outdoor Pan and Tilt Head with Controller,
Cables and Power Supply. Comes ready to use, no customer splicing wires
or soldering necessary. You can pan and tilt at the same time, you can make
diagonal movements.
The FPT3000 motor features; A
rugged weatherproof single speed head. You can pan and tilt at the same time, you can make any diagonal
movements.
Pans a full 450°. Tilts -90° to +90° (equals
180° total).
Power Supply Voltage: 117 VAC, 50-60 Hz OPTIONAL 200-240VAC (Must be Ordered)
Power Supply Current Consumption: 120 VA ONE AMP
Rotor Voltages: 24 VAC
Cable Conductors Required: 12 each - #20 AWG or larger (over 100 feet, use #18 AWG instead of #20)
Rotation Time (Non Loaded): Elevation (180°): 67 sec at 60 Hz Azimuth (360°): 58 sec at 60 Hz
All materials contained in www.floatograph.com are protected by
copyright and trademark and shall not be used for any purpose other than
private, non-commercial viewing purposes. Derivative works and other
unauthorizedcopying or use of stills, audio and video footage are
expressly prohibited.
FLOATOGRAPH and ELEVATED-PHOTOGRAPHY & ELEVATED-PHOTOS are trademarks
of Floatograph Technologies
The Affordable Mobile PTZ
